Canon REALiS LCOS SX80 Mark II D Multimedia Projector SX80 MarkII/SX800 Users - Page 111

Initializing network settings (SX80 II) [Other settings] -[Network setting initialization] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Network setting initialization You can Initialize the network settings. Setting Various Function Resetting to the Default Setting [Other settings] - [Factory defaults] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Factory defaults You can reset the menu item settings and restore the system settings to the factory defaults. Setting Up Functions from Menus Press the OK button after selecting [Network setting initialization], and the following screen for confirmation appears: Press the OK button after selecting [Factory defaults], and the following screen for confirmation appears: Yes The network settings is initialized. No Initialization is aborted. Press the OK button to accept your setting and then press the MENU button. • Initialized are "IP address" and other items set in "Connecting the Projector to Network (SX80 II)" (P125). • You can do this initialization also from a Web browser. (P134) OK Settings are reset to default. Cancel Settings are not reset to default. Press the OK button to accept your setting and then press the MENU button. • This function cannot reset the value of [Lamp counter], [Language], [Remote control], [Input signal] and [Network setting] to default. • For factory defaults settings, refer to the page 164 - 166. 111