Canon REALiS LCOS SX80 Mark II D Multimedia Projector SX80 MarkII/SX800 Users - Page 20
Do Not Use in the Following Environments, Using the Projector at 1900 Meters or More Above Sea Level
View all Canon REALiS LCOS SX80 Mark II D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Safety Instructions Caution Position the projector in a horizontal position. Incorrect installation may cause troubles and accidents. • Do not tilt the projector more than 20 degrees above and below the horizontal. • When you want to use your projector point- 20° ing up or down, make sure to place the pro- jector straight up or down. 20° Do Not Use in the Following Environments • Do not place the projector on an unstable or slanted surface. The projector may fall causing a personal injury. • Do not place it in an oily, smoky, or damp location (e.g., near a cooking table or a humidifier). It may cause a fire or an electric shock. • Place the projector with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Otherwise, it may damage the projector due to bad exhaust ventilation. • Do not put anything near the exhaust vent that may deform or deteriorate due to heat. • Do not install the projector in a humid or dusty location or a position where there is a lot of oily or cigarette smoke. Optical parts such as a lens and mirror may be stained, resulting in poor picture quality. • Do not place it near an exhaust outlet of air-conditioning equipment. Otherwise, it may be damaged. If the projector is carried from a cold place to a warm place or the room temperature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture. Wait until condensation evaporates and normal picture is shown. Do not use the projector in a place subject to either very high or very low temperatures. Doing so may cause malfunction. The ranges of the operating and storage temperatures are as shown below: Operating temperature: +5°C to +35°C (Humidity: 85% or below) Storage temperature: -10°C to +60°C Using the Projector at 1900 Meters or More Above Sea Level • If you use the projector at 1900 meters or more above sea level, the special configuration is required to cool down the projector properly. Contact your dealer. 20