Home » Canon Manuals » Projectors » Canon REALiS LCOS SX80 Mark II D » Manual Viewer

Canon REALiS LCOS SX80 Mark II D Multimedia Projector SX80 MarkII/SX800 Users - Page 156

Specifications, Projector, Remote Control

View all Canon REALiS LCOS SX80 Mark II D manuals

Add to My Manuals
Save this manual to your list of manuals

Page 156 highlights

Specifications ■ Projector Projection Display lens device Model name SX80 MarkII/SX800 Display system RGB liquid crystal system Optical system Color separation by dichroic mirror/polarizing beam splitter and color composition by prism Type Reflective liquid crystal panel Size/Aspect ratio 0.55" x 3/4:3 Drive system Active matrix system Number of pixels/Total Number of pixels 1,470,000 (1400 x 1050) x 3 panels/4,410,000 Zoom ratio/Focal length/F value 1.5/f=16.6 to 24.8mm/F1.95 to F2.6 Zooming and focusing system Electronic operation/electronic operation (SX80 MarkII: with auto focusing function) Lens shift 10:0 (fixed) Light source 230W high-pressure lamp Screen size (projection distance) 40" to 300" (1.2m/3.9' to 9.1m/12.8') Number of producible colors 16,770,000 colors (full color) Brightness* 3,000 lm (at presentation) Contrast ratio 900:1 (full white:full black, at presentation) Uniformity* 88% (at presentation) Speaker 1W monaural x 1 Maximum input resolution 1600 x 1200 dots (compression) Video signals ANALOG PC input UXGA/SXGA+/SXGA/WXGA/XGA/SVGA/VGA (scan rate: horizontal: 15 to 75KHz, vertical 50 to 85Hz) DIGITAL PC input (SX80 II) SXGA+/SXGA/XGA/SVGA/VGA COMPONENT input 1080p, 1080i, 1035i, 720p, 576p, 576i, 480p, 480i HDMI input (SX80 II) 1080p, 1080i, 720p, 576p, 480p VIDEO/S-VIDEO (SX80 II) input NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N ANALOG PC-1/DVI-I IN terminal (SX80 II) DIGITAL PC, ANALOG PC-1 (DVI-I connector 29-pin) HDMI IN terminal (SX80 II) HDMI (HDMI ver. 1.3) Input terminals ANALOG PC-1 terminal (SX800) ANALOG PC-1 (mini D-sub 15-pin) ANALOG PC-2/COMPONENT IN terminal ANALOG PC-2, COMPONENT (mini D-sub 15-pin) S-VIDEO IN terminal (SX80 II) S-Video (mini DIN 4-pin) VIDEO IN terminal Composite (RCA) USB terminal (SX80 II) USB connection, PictBridge input (USB type A) CONTROL terminal RS-232C (D-sub 9-pin) Audio Input terminal Audio signal (stereo mini jack x 3) Video Output terminal (SX80 II) Analog PC (mini D-sub 15-pin) Audio Output terminal Audio signal (stereo mini jack) LAN terminal (SX80 II) Network connection (RJ-45) Digital PC (SX80 II) TMDS (Transition Minimized Differential Signaling) 0.7Vp-p, positive polarity, impedance = 75Ω Input signals Analog PC Horizontal/vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance=75Ω Video Video:1Vp-p, negative synchronization, impedance = 75Ω S-video: Separate YC signal, Y: 1Vp-p, negative synchronization, impedance = 75Ω C: 0.286Vp-p (burst signal), impedance = 75Ω Component: Separate Y Cb/Pb Cr/Pr signal Y: 1Vp-p, Negative synchronization, impedance = 75Ω Cb/Pb: 0.7Vp-p, impedance = 75Ω Cr/Pr: 0.7Vp-p, impedance = 75Ω Audio 142mVrms, impedance = 47 KΩ or more Noise (normal mode/silent mode) 35/31dB Operating temperature 5 °C to 35 °C Power supply AC 100-240 V 50/60 Hz Power consumption (normal mode/silent mode/standby state) 330W/270W/15W (SX80 II) 320W/260W/8W (SX800) Dimensions 332 (W) x 121 (H) x 340 (D) mm/13.3 (W) x 4.8 (H) x 13.6 (D) in (excluding protrusions) Weight 5.2 kg/11.4 lbs (SX80 II) 5.0 kg/11.0 lbs (SX800) Remote control, batteries for remote control, power cord, computer connection Accessories cable, component cable, carrying bag, lens cover, string for lens cover, User's Man- ual, and Warranty Card. * 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteristics of the LCD panel. * Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts. ■Remote Control Power supply Operating range Dimensions Weight (not including batteries) Two 3.0 V, AAA-size batteries About 5 m (16.4') (to infrared remote receiver) 42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in 55 g 156

Section	Page
To Start Menu	2
Major Features	2
Quick Reference Guide	5
Table of Contents	6
Safety Instructions	12
Safety Precautions	13
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.	14
AC Power Cord Requirement	16
Federal Communication Commission Notice	17
Canadian Radio Interference Regulations	17
Precautions on Handling the Batteries in the Remote Controller	18
Lamp Handling Precautions	18
Carrying/Transporting the Projector	19
Installation Precautions	19
Before Use	21
Supplied Accessories	22
Installing the Lens Cap	22
Putting the Projector in the Carrying Bag	23
Part Names	24
Main Unit of Projector	24
Front Side	24
Rear Side	24
Bottom Side	25
Remote Control	26
Top Control	28
Input Terminals	29
SX80 MarkII	29
SX800	29
Preparing the Remote Control	31
Installing Remote Control Batteries	31
Remote Control Operating Range	31
Projecting an Image	33
Steps for Setting Up the Projector and Projecting an Image	34
Setting Up the Projector	35
Placing in Front of the Screen	35
Placing on a Level Place	36
When Pointing the Projector Up	37
Connecting the Projector	38
Connectable Equipment and Input Terminals	38
SX80 MarkII	38
SX800	39
Connecting the Projector to the Computer	40
Connecting to RGB Monitor Output Terminal (analog connection)	40
Connecting to DVI Monitor Output Terminal (digital connection) (SX80 II)	42
Outputting an Image and Audio	42
Connecting to AV Equipment	44
Connecting to Digital Video Output Terminal (digital connection) (SX80 II)	44
Connecting to Analog Video Output Terminal (analog connection)	45
Outputting Audio to Speakers	47
Connecting a Digital Camera or an USB Flash Memory (SX80 II)	48
Starting Projection	49
When the Language Selection Screen Appears	50
When the Password Input Screen Appears	51
When \	51
When Notebook Computer Screen Does Not Appear	51
Adjusting Image	51
Changing Notebook Computer Screen Output	51
Turning On External Monitor Output	51
Setting Up the Screen Automatically	52
Auto Setup	52
Performing the Auto Setup	53
Selecting an Input Signal (INPUT)	54
Types of Input Signals	54
Selecting an Input Signal	55
Adjusting Image	56
Setting the Display Resolution of the Computer	56
Windows Vista	56
Windows XP	56
Macintosh OSX	56
AUTO PC	57
Performing the Auto PC Function	57
Adjusting the Image Size	58
Adjusting the Focus	59
Auto focusing (SX80 II)	59
Manual focusing	59
Adjusting Keystone Distortion	60
Auto adjustment	60
Manual adjustment	60
Resetting the Keystone Adjustment	61
Selecting Screen Aspect and Aspect	62
Selecting Screen Aspect	62
Moving Image with 16:9 D. Image Shift	64
Resetting the Image Shift	64
Selecting Aspect Ratio	65
Types of Aspect Ratios	65
How to Select an Aspect Ratio	66
Selecting an Image Mode	67
Image modes	67
How to Select an Image Mode	67
Turning Off the Projector	68
Useful Functions Available During a Presentation	69
Useful Functions Available During a Presentation	70
Blackened Out an Image Temporarily	70
Freezing the Picture	70
Adjusting the Volume	71
Muting the Sound	71
Zooming an Image	72
Showing the Elapsed Time	73
Projecting Image Without Computer (SX80 II)	73
Setting Functions from Menus	75
How to Use Menus	76
Menu Configuration	76
Basic Operation of Menu	77
Setting Display Status	79
Selecting an Image Projection Mode	79
Selecting an Input Signal Type (ANALOG PC)	80
Selecting an Input Signal Type (VIDEO/S-VIDEO)	80
Selecting an Input Signal Type (COMPONENT)	81
Adjusting Input Signal (ANALOG PC) - Total Dots	81
Adjusting Input Signal (ANALOG PC) - Tracking	82
Adjust Input Signal (ANALOG PC) - Horizontal position	82
Adjust Input Signal (ANALOG PC) - Vertical position	83
Adjust Input Signal (ANALOG PC) - Horizontal pixels	83
Adjust Input Signal (ANALOG PC) - Vertical pixels	84
Selecting HDMI Input Level (SX80 II)	84
Select HDMI Over Scan (SX80 II)	85
Performing Progressive Processing	85
Selecting a Menu Position	86
Correcting the Screen Color	86
Reversing projection	87
Capturing a Logo (SX800)	88
Selecting the User Logo Display Position (SX800)	88
No Signal Screen (SX80 II)	89
Screen When Blank (SX80 II)	89
Selecting a Logo at Startup (SX80 II)	90
No Signal Screen (SX800)	90
Screen When Blank (SX800)	91
Selecting a Logo at Startup (SX800)	91
Selecting Aspect Ratio of Screen	92
Setting the Image Quality	93
Selecting an Image Quality	93
Adjusting the Brightness	94
Adjusting the Contrast	94
Adjusting the Sharpness	95
Making a Gamma Correction	95
Making Color Adjustment (HDMI) (SX80 II)	96
Making Color Adjustment (Digital PC/Analog PC/USB) (SX80 II)	96
Making Color Adjustment (COMPONENT/VIDEO/S-VIDEO) (SX80 II)	97
Making Color Adjustment (Analog PC) (SX800)	97
Making Color Adjustment (COMPONENT/VIDEO) (SX800)	98
Making Advanced Adjustment (Noise reduction)	98
Making Advanced Adjustment (Dynamic gamma)	99
Making Advanced Adjustment (Mem. color correct) (SX80 II)	99
Making Advanced Adjustment (Auto fleshtone) (SX800)	100
Adjusting Fine Color Adjustment (6-axis color adjust) (SX80 II)	100
Correcting the Image According to the Ambient Light (SX80 II)	101
Reducing the Lamp Brightness	102
Resetting the Image Settings	102
Setting Various Function	103
Setting Auto Setup Function	103
Selecting the Power Management Mode	103
Skip the POWER Button Operation	104
Enabling/Disabling the Beep	104
Prohibiting the Projector Operation	105
Selecting a Display Language	105
Showing/hiding the Guide Screen	106
Turning on/off LED Illumination	106
Setting for Slideshow (SX80 II)	107
Setting up the Remote Control Channel	107
Extending the Menu Display Time	108
Setting a Password	108
Registering a Password	109
Resetting the Lamp Counter	109
About the Display of the Lamp Counter	110
Initializing network settings (SX80 II)	111
Resetting to the Default Setting	111
Checking the Information of the Projector	112
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)	113
Projecting an Image from a Digital Camera (SX80 II)	114
Connecting a Digital Camera	114
Operating the Projected Image	116
Switching to the Next Image	116
Rotating an Image	116
Running a Slideshow	117
Setting a Slideshow Interval	117
Finishing projection	117
Projecting Data on USB Flash Memory (SX80 II)	118
Connecting an USB Flash Memory	118
Description of USB File Browser	120
Selecting an Image for Projection	121
Selecting a Drive	121
Selecting a Folder	121
Selecting an Image File for Projection	122
Operating the Projected Image	123
Switching to the Previous/Next Image	123
Rotating an Image	123
Returning to the USB File Browser	123
Running a Slideshow of Data saved in a USB Flash Memory	124
Creating an Image File Folder	124
Setting a Slideshow Interval	124
Connecting the Projector to Network (SX80 II)	125
Setting an IP Address (SX80 II)	126
Setting IP Address of the Computer	126
Resetting the IP Address Setting of the Computer	127
Setting Network (SX80 II)	128
Displaying the Network Configuration Screen	128
Setting the Network	129
Resetting the Network Setting	134
Error Notification Message	135
Projector Control	136
Appendix	137
Troubleshooting	138
WARNING Lamp Flash Patterns	138
Symptoms and Solutions	139
You cannot turn on the projector.	139
You cannot project an image from the projector.	139
A digital camera or USB flash memory is not recognized. (SX80 II)	140
You cannot hear sound.	140
The projected image is blur.	141
You cannot project an image appropriately.	141
The projector is forced to be turned off.	141
You cannot operate the remote control.	142
Maintenance	143
Cleaning the Projector	143
Cleaning and Replacing the Air Filter	144
Cleaning the Air Filter	144
Replacing the Air Filter	144
Replacing the Lamp	145
About the Replacing Lamp	145
Replacing the Lamp	146
Relationship between Aspect and Screen Aspect	147
When Projecting an Image from a Computer	147
When Projecting an Image from Image Software	148
When Projecting an Image from a Digital Camera or a USB Flash Memory (SX80 II)	149
Supported Computer Signal Types	150
Relationship between Screen Size and Projecting Distance	151
Glossary	152
Specifications	156
Projector	156
Remote Control	156
External View	157
ANALOG PC-1 (SX800), ANALOG PC-2/COMPONENT IN terminal	157
Service Port (CONTROL)	158
Index	160
Numerics	160
A	160
B	160
C	160
D	160
E	160
F	160
G	160
H	160
I	161
K	161
L	161
M	161
N	161
O	161
P	161
R	161
S	161
T	162
U	162
V	162
W	162
Z	162

Match case Limit results 1 per page

156

Specifications

■

Projector

99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteris-

tics of the LCD panel.

Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.

■

Remote Control

Model name

SX80 MarkII/SX800

Display system

RGB liquid crystal system

Optical system

Color separation by dichroic mirror/polarizing beam splitter and color composition by

prism

Display

device

Type

Reflective liquid crystal panel

Size/Aspect ratio

0.55" x 3/4:3

Drive system

Active matrix system

Number of pixels/Total Number of pixels

1,470,000 (1400 x 1050) x 3 panels/4,410,000

Projection

lens

Zoom ratio/Focal length/F value

1.5/f=16.6 to 24.8mm/F1.95 to F2.6

Zooming and focusing system

Electronic operation/electronic operation (SX80 MarkII: with auto focusing function)

Lens shift

10:0 (fixed)

Light source

230W high-pressure lamp

Screen size (projection distance)

40" to 300" (1.2m/3.9' to 9.1m/12.8')

Number of producible colors

16,770,000 colors (full color)

Brightness*

3,000 lm (at presentation)

Contrast ratio

900:1 (full white:full black, at presentation)

Uniformity*

88% (at presentation)

Speaker

1W monaural x 1

Maximum input resolution

1600 x 1200 dots (compression)

Video signals

ANALOG PC input

UXGA/SXGA+/SXGA/WXGA/XGA/SVGA/VGA (scan rate: horizontal: 15 to 75KHz,

vertical 50 to 85Hz)

DIGITAL PC input (SX80 II)

SXGA+/SXGA/XGA/SVGA/VGA

COMPONENT input

1080p, 1080i, 1035i, 720p, 576p, 576i, 480p, 480i

HDMI input (SX80 II)

1080p, 1080i, 720p, 576p, 480p

VIDEO/S-VIDEO (SX80 II) input

NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N

Input terminals

ANALOG PC-1/DVI-I IN terminal (SX80 II)

DIGITAL PC, ANALOG PC-1 (DVI-I connector 29-pin)

HDMI IN terminal (SX80 II)

HDMI (HDMI ver. 1.3)

ANALOG PC-1 terminal (SX800)

ANALOG PC-1 (mini D-sub 15-pin)

ANALOG PC-2/COMPONENT IN terminal

ANALOG PC-2, COMPONENT (mini D-sub 15-pin)

S-VIDEO IN terminal (SX80 II)

S-Video (mini DIN 4-pin)

VIDEO IN terminal

Composite (RCA)

USB terminal (SX80 II)

USB connection, PictBridge input (USB type A)

CONTROL terminal

RS-232C (D-sub 9-pin)

Audio Input terminal

Audio signal (stereo mini jack x 3)

Video Output terminal (SX80 II)

Analog PC (mini D-sub 15-pin)

Audio Output terminal

Audio signal (stereo mini jack)

LAN terminal (SX80 II)

Network connection (RJ-45)

Input signals

Digital PC (SX80 II)

TMDS (Transition Minimized Differential Signaling)

Analog PC

0.7Vp-p, positive polarity, impedance = 75

Ω

Horizontal/vertical synchronization: TTL level, negative or positive polarity

Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance=75

Ω

Video

Video:1Vp-p, negative synchronization, impedance = 75

Ω

S-video: Separate YC signal, Y: 1Vp-p, negative synchronization, impedance = 75

Ω

C: 0.286Vp-p (burst signal), impedance = 75

Ω

Component: Separate Y Cb/Pb Cr/Pr signal

Y: 1Vp-p, Negative synchronization, impedance = 75

Ω

Cb/Pb: 0.7Vp-p, impedance = 75

Ω

Cr/Pr: 0.7Vp-p, impedance = 75

Ω

Audio

142mVrms, impedance = 47 K

Ω

or more

Noise (normal mode/silent mode)

35/31dB

Operating temperature

5 °C to 35 °C

Power supply

AC 100-240 V 50/60 Hz

Power consumption (normal mode/silent

mode/standby state)

330W/270W/15W (SX80 II)

320W/260W/8W (SX800)

Dimensions

332 (W) x 121 (H) x 340 (D) mm/13.3 (W) x 4.8 (H) x 13.6 (D) in (excluding protrusions)

Weight

5.2 kg/11.4 lbs (SX80 II)

5.0 kg/11.0 lbs (SX800)

Accessories

Remote control, batteries for remote control, power cord, computer connection

cable, component cable, carrying bag, lens cover, string for lens cover, User's Man-

ual, and Warranty Card.

Power supply

Two 3.0 V, AAA-size batteries

Operating range

About 5 m (16.4') (to infrared remote receiver)

Dimensions

42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in

Weight (not including batteries)

55 g