Canon Vistura Vistura Instruction Manual - Page 22
Connect the RF unit to the camera, using the RC-150 RF adapter
UPC - 009322161444
View all Canon Vistura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting the RF unit/adapter cables E 1. Connect the RF unit to the camera, using the RC-150 RF adapter cables. • The RF unit and RF adapter cables are available separately. 2. Connect the antenna cable to the FROM ANT. terminal on the RF unit. • If your TV has flat twin-lead cable, use the 300-75 ohm adapter. 3. Connect the TO TV terminal on the RF unit to the antenna input on the TV. • Use the coaxial cable with F-connectors. If your TV has flat twin-lead cable, use the 75-300 ohm adapter. Attaching the 300-75 ohm adapter Loosen the screws on the adapter and insert the antenna cable. Tighten the screws again. Mastering the Basics If the antenna cable does not have antenna lugs, you will need to strip one end of the cable and wind the wires around the screws. Selecting the video channel Turn the TV on, start playback on the camera (see p. 18), and set the TV and the RF unit to the video channel. 4CH 3CH TO TV FROM ANT The video channel is the channel which is not used by a broadcasting station in your area and can be used for videocassette playback (channel 3 or 4). 4CH 3CH Note: • Turn the camera off or disconnect it from the RF unit when you want to watch a broadcast program. 23