Canon Vistura Vistura Instruction Manual - Page 59
Using the Editing Function for the First Time
UPC - 009322161444
View all Canon Vistura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Using the Editing Function for the First Time When you use the editing function for E the first time, or with a different VCR, you should set your camcorder to send the correct remote control signals to your VCR. The camera will not forget this setting unless you change it. Do not alter it again unless you change VCR. SET UP [ MENU ] R TN W I RE L E SS C. . ON RECORDER . . . . 1 -A CUT-I N A D J . . . - 3 : 0 0 CUT-O U T A D J . . + 1 : 0 0 Preparations & Setting Up 1. Make sure that the camera and VCR are set up as in "Preparations," p. 59 and "Setting the Camera to Control your VCR," p. 59. 2. Open the set up menu and point the arrow to RECORDER . • It is easiest to view the menu on the TV screen. Editing Setting RECORDER Use the chart on p. 61 to find the RECORDER settings for your brand of VCR. Make sure the camcorder's infra-red control signals can reach the VCR, and the VCR is in record pause mode. (Ready to record and on pause.) 1. Set RECORDER to the first setting for your brand of VCR. • For example, 7-A if you have a JVC VCR. • Turn the command dial clockwise to change the setting. 2. If the setting is correct, the VCR will start recording automatically. • This will occur as long as the camera is pointing at the VCR's remote sensor while you change the setting. 3. If the VCR does not start recording, try the next setting. • Turn the command dial (to 7-B in the above example). • Try each setting in turn until the VCR starts to record. • During this operation, you cannot operate the wireless controller. 4. Once the VCR starts to record, check that the setting is right. Set the VCR to record-pause again, then press the camera's start/stop button. • The VCR should start to record for a few seconds, and REC appears in the display and on the TV screen. Then it will automatically pause and PAUSE appears in the display and on screen. • During these REC, PAUSE operations, the VCR records digital timer, which you will use later for Cut-In and Cut-Out Adjustments. For more accurate adjustments, we recommend you to repeat pressing the start/stop button to record couple of times. • If not, then the setting is still not right. Try the next setting. 60