Canon Vistura Vistura Instruction Manual - Page 58
Preparing for Editing
UPC - 009322161444
View all Canon Vistura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Preparing for Editing The VISTURA's Auto Editing Funciton enables you to smoothly rerecord scenes E from an original tape in any order. You can then view the entire finished product and make all the fine adjustments you want before the final recording. It is easy to reorder, to make your videos perfect. 1. Connect the camera to the VCR. • See the "Connection for playback on a TV" instructions on page 21. 2. Turn the TV on. • Be sure to set it to the video channel, or set the TV/Video selector to Video. 3. Turn on the VCR and load a blank cassette. • See your VCR instruction manual. 4. Open the VCR menu and select aEDIT MODE. • When you select the edit menu all the displayed informations are also displayed on the screen of the TV connected your VCR. However, these informations will not be recorded onto the tape in the VCR. Editing Setting the Camera to Control your VCR The camcorder's Auto Editing Function controls your VCR by using the same infra-red signals as the VCR's remote control. Make sure the camera is in a spot where it can remotely control your VCR. Infra-red signals transmitter 1. Check where the remote control sensor is on your VCR using its normal remote control. 2. Place the camera pointing directly at the sensor, not more 20 inches (50cm) away. • Check that the sensor will pick up signals easily from this spot using the VCR's normal remote control. • Make sure that the cables and the camera strap do not obstruct the signals. 3. Make sure that the VCR is in record-pause mode. 4. Make sure that all the other video equipments are turned off to avoid accidental recording. 59