Canon Vistura Vistura Instruction Manual - Page 80
Troubleshooting
UPC - 009322161444
View all Canon Vistura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Troubleshooting Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given for each problem on the list - turn to the page E numbers in brackets for more information. Make sure that the camera is properly connected if you are using it with a TV or VCR. Consult your dealer or service outlet if problems persist. Recording/Playback Problem Cause and/or what to do about it ? Nothing happens when I press the buttons • The camera is not switched on (p. 12, 18). • The cassette is not loaded or is set for erasure prevention (p. 10-11). • The tape has reached the end. • The battery pack is exhausted or not properly attached (p. 8, 9, 73). • The function cannot be used in that recording program (p. 39). ? The camera turned itself off. • The camera was in record pause mode for more than about five minutes (p. 12). • The battery pack is exhausted (p. 9). ? The start/stop button doesn't work. • The POWER switch is not set to CAMERA (p. 12). • The standby lever is set to LOCK (p. 12). • The cassette is not loaded or is set for erasure prevention (p. 10-11). • The tape has reached the end. Additional Information ? There's no picture in the display. • The POWER switch is not set to CAMERA (p. 12). • The standby lever is set to LOCK (p. 12). ? There's a blank blue screen in the display. • You are attempting to play back or record from a copyright protected cassette (p. 71). • The tape heads are very dirty (p. 78). 81