Canon Vistura Vistura Instruction Manual - Page 56

Returning to a Pre-Marked Position P OFF VCR POWER DATA CODE EXECUTE ZERO SET SEARCH MEMORY SELECT REC PAUSE REW PLAY FF STOP PAUSE SLOW 2 E Use the wireless controller to go back to a pre-determined point on a tape following playback. 1. Press the ZERO SET MEMORY button during playback at a point you want to return to later. • The time code is replaced by a tape counter that is set to zero with the M indication. 2. When you have finished playback, fast forward or rewind the tape. The tape stops automatically when it reaches the zero set position. • The tape counter with M indication disappears from the display and the time code reappears. Notes: • Press the ZERO SET MEMORY button once more to cancel the zero set memory before you forward/rewind the tape. • The zero set memory may not function correctly where there is a break between recordings on the tape. • You can also use zero set memory to mark a position on a tape in record pause mode. When you then play back the tape, pressing rewind will take you back to the pre-marked position. • If you remove the tape while the zero set memory is set, the memory is canceled and the tape counter reverts to timecode. Using the Full Range of Features 57