Canon XF400 XF400 XF405 Instruction Manual - Page 107
Copying Clips and Photos, Open the de, ired index, creen, elect [Copy, or [Copy, Touch the de
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Clip and Photo Operations Copying Clips and Photos You can copy clips and photos from one SD card to the other. Operating modes: Copying Clips and Photos from the Index Screen 1 Open the desired index screen (A 101). • To copy all the MP4 clips or photos recorded on the same date (saved in the same folder), drag your finger left/right until an MP4 clip or photo you want to copy appears. 2 Select [Copy (6'7)] or [Copy (7'6)]. [FUNC] > [Copy (6'7)] or [Copy (7'6)] 3 Touch the desired option and then touch [Yes]. • When you select [Select], perform the following procedure to select the individual recordings you want to copy before touching [Yes]. • Touch [Stop] to interrupt the operation while it is in progress. 4 When the confirmation message appears, touch [OK]. 107 To select individual recordings 1 Touch on the individual clips/photos you want to copy. • A checkmark ! will appear on the recordings you touch. The total number of selected clips/photos will appear next to the " icon. • Touch a selected clip or photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes]. 2 After selecting all the desired recordings, touch [OK]. Options : Copies all the MP4 clips or photos recorded on a particular date. The last 4 digits of the folder name in the button indicate the recording date (1103 = November 3). [Select]: You can select the individual clips or photos you want to copy. [All Clips], [All Photos]: Copies all the clips or photos. Copying a Single Photo 1 Play back the desired photo (A 102). 2 Touch the screen to display the playback controls and then copy the photo. [FUNC] > [Copy (6'7)] or [Copy (7'6)] > [¨ Proceed] > [Yes] 3 Drag your finger left/right to select another photo to copy or touch [X]. IMPORTANT • Observe the following precautions while the ACCESS indicator is illuminated in red. Failing to do so may result in permanent data loss. - Do not open the SD card compartment cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode.