Canon XF400 XF400 XF405 Instruction Manual - Page 23
Using the Lens Hood and Lens Cap, aligned with the top
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using the Lens Hood and Lens Cap While recording, the supplied lens hood with lens barrier is effective for reducing stray light that can be the cause of lens flare and ghost images. Additionally, closing the lens barrier can help prevent fingerprints and dirt accumulation on the lens. To carry/transport the camcorder or store it after use, remove the lens hood and place the lens cap back on the camcorder. 1 Remove the lens cap. • The lens cap and lens hood cannot be used simultaneously. 2 Place the lens hood on the front of the lens so that the groove on the lens hood is aligned with the top of the lens (ቢ), and then turn the lens hood clockwise until it stops with a click (ባ). • Be careful not to deform the lens hood. • Make sure that the lens hood is aligned with the thread. To remove the lens hood 1 Press and hold the lens hood release button and turn the lens hood counterclockwise. 2 Place the lens cap back on the lens. Preparing the Camcorder 23 ባ ቢ Lens hood release button