Canon XF400 XF400 XF405 Instruction Manual - Page 108

Clip and Photo Operations 108 NOTES • In the following cases, you will not be able to copy recordings to SD card B: - If the SD card compartment cover is open. - If the LOCK switch on the destination SD card is set to prevent writing. - If a file number (A 143) cannot be created because the number of folders and files in the card has reached its maximum. • If there is not enough space on the destination SD card, as many photos as possible will be copied before stopping the operation. • Video stream files over 4 GB in size cannot be copied onto SDHC cards. Recovering Clips Some actions, such as suddenly turning off the camcorder or removing the SD card while data is being recorded, can cause data errors in the recorded clip. You may be able to recover clips with corrupted data with the following procedure. Operating modes: 1 Open the index screen with the clip you wish to recover (A 101). 2 Touch the corrupted clip (a clip with the icon instead of a thumbnail image). 3 When [Attempt to recover the data?] is displayed, touch [Yes]. • The camcorder will attempt to recover the corrupted data. 4 When the confirmation message appears, touch [OK]. NOTES • In the index screen, recovered MP4 clips appear with a special playback icon instead of the usual thumbnail. • This procedure may delete clips shorter than 0.5 seconds in length. • In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted or the SD card is physically damaged. • Only clips recorded with this camcorder can be recovered. Photos cannot be recovered.