Canon XF400 XF400 XF405 Instruction Manual - Page 114

Audio Output Audio Output The camcorder can output audio from the SDI OUT terminal (m only), HDMI OUT terminal, × (headphone) terminal or built-in mono speaker. When recording, or playing back clips recorded, with 4-channel audio, you 114 can select which audio channels will be output from the terminals and speaker. Audio output configuration MP4 audio format1 [ LPCM 16bit 4CH] [ AAC 16bit 2CH] Audio configuration of the recorded clips 4-channel linear PCM, 16 bit 2-channel MPEG-2 AAC-LC, bit rate: 256 kbps Audio output configuration m SDI OUT terminal HDMI OUT terminal2 4-channel linear PCM, 24 bit 2-channel linear PCM, 16 bit 1 [3 Recording Setup] > [¸ Audio Format] setting. 2 You can select the audio channels that are output with the following procedure. Operating modes: Selecting the Audio Channels 1 Select [Monitor Channels] or [HDMI Channels] depending on the terminal you wish to use. > [¡ #* Audio Setup] > [Monitor Channels] (headphones/speaker) or [HDMI Channels] (HDMI OUT terminal) *Page ! in mode. 2 Touch the desired option and then touch [X]. Options All of the following settings are available for [Monitor Channels]; only [ƒ CH1/CH2] and [ available for [HDMI channels]. CH3/CH4] are Setting Audio output L [ƒ CH1/CH2] CH1 [š CH1/CH1] CH1 [Ÿ CH2/CH2] CH2 [ CH1+2/CH1+2] CH1+CH2 mixed [ CH3/CH4]* CH3 [ CH3/CH3]* CH3 [ CH4/CH4]* CH4 [ CH3+4/CH3+4]* CH3+CH4 mixed [ CH1+3/CH2+4]* CH1+CH3 mixed * In mode, these options are available only during 4-channel audio recording. R CH2 CH1 CH2 CH1+CH2 mixed CH4 CH3 CH4 CH3+CH4 mixed CH2+CH4 mixed NOTES • If you set an assignable button to [œ Monitor Channels] (A 98), you can press the button to change the audio channels output from the × (headphone) terminal.