Canon XF400 XF400 XF405 Instruction Manual - Page 22
Preparing the Camcorder, Attaching the Microphone Holder Unit, Attaching the Handle Unit
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preparing the Camcorder Preparing the Camcorder This section covers the basic preparations for the camcorder such as attaching the handle unit and lens hood, and adjusting the viewfinder and LCD screen. 22 IMPORTANT • Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a table or other stable surface is recommended. Attaching the Microphone Holder Unit Use a commercially available Phillips head ("crosshead") screwdriver to attach the microphone holder unit to the handle unit with the two supplied screws. Attaching the Handle Unit The camcorder is functional even if you remove the handle unit. However, to use the INPUT terminals (A 83), infrared light (A 92) and tally lamp (A 40), the handle unit must be correctly attached to the camcorder. 1 Align the handle unit with the handle attachment unit and then slide the handle unit forward until it is in place. 2 Firmly tighten the front and rear screws. • To tighten the rear screws you can use a coin or similar object.