Canon XF400 XF400 XF405 Instruction Manual - Page 90
Color Bars/Audio Reference Signal, Recording Color Bars, Recording an Audio Reference Signal
![]() |
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder generate color bars and a 1 kHz audio reference signal to calibrate an external monitor. The color bars and audio reference signal can be output from the SDI OUT terminal (m only), 90 HDMI OUT terminal and × (headphone) terminal*. * Audio reference signal only. Operating modes: Recording Color Bars You can choose between SMPTE and ARIB color bars. 1 Select [Color Bars]. > [3 % Recording Setup] > [Color Bars] 2 Touch the desired option and then touch [X]. • The selected color bars appear on the screen and will be recorded when you press the REC button. NOTES • You cannot change the type of color bars while recording or when pre-recording is activated. Recording an Audio Reference Signal The camcorder can output a 1 kHz audio reference signal with the color bars. 1 Select [1 kHz Tone]. > [3 % Recording Setup] > [1 kHz Tone] 2 Touch the desired option and then touch [X]. • You can select one of three audio levels (-12 dB, -18 dB, -20 dB) or select [j Off] to turn off the signal. • The signal is output at the selected level and will be recorded when you press the REC button.
![](/manual_guide/products/canon-xf400-xf400-xf405-instruction-manual-1818d81/90.png)