Canon XF400 XF400 XF405 Instruction Manual - Page 117

7 Network Functions About the Network Functions You can connect the camcorder to a wireless network using Wi-Fi (A 119) or to a wired network using an Ethernet cable (A 125). Once the camcorder is correctly connected to a network, you can use the following network functions. 117 Network functions and connection types Network function Description Wi-Fi Wired network Infrastructure1 Camera Access Point2 A Browser Remote Control the camcorder remotely from the Web browser of a connected device. Ü - Ü 127 IP Streaming Stream the camcorder's live video and audio over IP to a compatible IP video decoder Ü - connected to network. - 135 Transfer clips recorded with the camcorder to FTP File Transfer another device connected to the network using Ü Ü the FTP protocol. - 137 1 Connection to a Wi-Fi network via an external access point (wireless router, etc.) 2 Direct connection to one Wi-Fi-enabled device where the camcorder itself serves as the Wi-Fi access point. Before using the network functions • The instructions in this chapter assume you already have a correctly configured and working network, network device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you plan to use. • Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet) and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations. IMPORTANT • Data transmitted over networks is not encrypted. • Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions. • Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Be aware of the risks involved.