Canon XF400 XF400 XF405 Instruction Manual - Page 109

6 External Connections 109 Video Output Configuration The video signal output from the SDI OUT terminal (m only) and HDMI™ OUT terminal depends on the clip's video configuration and on various menu settings. The video signal output from the HDMI OUT terminal can also change depending on the capabilities of the connected monitor. m The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminal simultaneously. Operating modes: Video Output Configuration by Terminal (Internal Recording Priority) Refer to the following table for the video output configuration from each terminal, depending on the video configuration used for recordings on an SD card (A 47) or the video configuration of the clip being played back. Movie format Video configuration of the clip Resolution Frame rate m Output terminal1 HDMI maximum resolution2 Video output configuration3 m SDI OUT HDMI OUT terminal terminal 3840x2160 MP4, XF-AVC 59.94P 29.97P 23.98P [ø SDI] [ù HDMI] [ø SDI] - [3840x2160] [1920x1080] 1920x1080 YCbCr 4:2:2 8 bit - 1920x1080 YCbCr 4:2:2 8 bit - 3840x2160 YCbCr 4:2:2 8 bit4 1920x1080 YCbCr 4:2:2 8 bit - 59.94P 1920x1080 29.97P - 23.98P [ù HDMI] 1920x1080 YCbCr 4:2:2 8 bit, - 720x480 YCbCr 4:2:2 8 bit5 XF-AVC 1920x1080 MP4 1280x720 59.94i 59.94P 29.97P [ø SDI] [ù HDMI] [ø SDI] [ù HDMI] - - [1920x1080] [1280x720] 1920x1080 / 59.94i - YCbCr 4:2:2 8 bit 1920x1080 / 59.94i YCbCr 4:2:2 8 bit, - 720x480 / 59.94P YCbCr 4:2:2 8 bit 1280x720 YCbCr 4:2:2 8 bit - 1920x1080, 720x480 YCbCr 4:2:2 8 bit5 - 1280x720, 720x480 YCbCr 4:2:2 8 bit5 1 [£ Display Setup] > [Output Terminal] setting. 2 [£ Display Setup] > [HDMI Max Resolution] setting. 3 During playback, YCbCr 4:2:0 video recorded on the card is output as a YCbCr 4:2:2 signal. 4 YCbCr 4:2:0 8 bit when the frame rate is set to 59.94P. 5 Only when the frame rate is set to 59.94P.