Canon XF400 XF400 XF405 Instruction Manual - Page 74
ND Filter, About changing the ND filter setting using the optional RC-V100 Remote Controller
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
ND Filter ND Filter Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when recording in bright surroundings. You can also use the ND filter to avoid the soft focus caused by diffraction when using small 74 apertures. You can select one of 3 density levels. You can also change the ND filter remotely using Browser Remote on a connected network device (A 127, 132). Operating modes: Press the ND FILTER + or - button to select the desired ND filter setting. • Repeatedly pressing ND FILTER + button will change the ND filter setting in the following order: [ND 1/4] [ND 1/16] [ND 1/64] ND filter off (no onscreen display). The ND FILTER - button cycles through the settings in reverse order. • The selected ND filter setting will appear at the left of the screen. NOTES • In the following cases, if the selected ND filter setting is not appropriate, the ND filter displayed on the screen will start flashing*. - The gain value is too high. - The aperture is too closed. Change the ND filter setting so the ND filter display stops flashing to mitigate the effect of such conditions. * When the optional RC-V100 Remote Controller is connected to the camcorder, the RC-V100's ND filter indicator will flash as well. • Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white balance (A 75) may be effective in such case. • About changing the ND filter setting using the optional RC-V100 Remote Controller: - When the remote controller is connected to the camcorder, you can use the remote controller's ND button in the same way as the camcorder's ND FILTER + button. - ND filter indicators 1 to 3 will illuminate in orange when the ND filter is set to 1/4, 1/16 and 1/64, respectively.