Canon XF400 XF400 XF405 Instruction Manual - Page 47

Video Configuration: Resolution, Bit Rate and Frame Rate Video Configuration: Resolution, Bit Rate and Frame Rate With the following procedures you can set the video configuration used for recording clips on an SD card in the camcorder. Select the combination of movie format, resolution/bit rate and frame rate settings that best matches your creative needs. Available options for some settings may change depending on previous selections for other 47 settings. See the table following the procedures for a summary. Operating modes: Selecting Internal Recording By default, the camcorder is configured to allow internal recordings on an SD card. If the camcorder was set to external recording-only mode, follow the procedure below to enable internal recording. For details about setting the video configuration for recordings using an external recorder connected to the camcorder's SDI OUT terminal (m only) or HDMI OUT terminal, refer to Connecting to an External Monitor or Recorder (A 111). 1 Select [Internal/External Rec]. > [3 ! Recording Setup] > [Internal/External Rec] 2 Touch [v Internal Rec Priority] and then touch [X]. Selecting the Movie Format 1 Select [Movie Format]. > [3 ! Recording Setup] > [Movie Format] 2 Touch [¸ MP4] or [ XF-AVC] and then touch [X]. Selecting the Resolution and Bit Rate 1 Select [¸ Resolution] or [ Resolution]. > [3 ! Recording Setup] > [¸ Resolution] or [ Resolution] 2 Touch the desired option and then touch [X]. • The selected resolution and bit rate will appear at the right of the screen.