Canon XF400 XF400 XF405 Instruction Manual - Page 41
Reviewing the Latest Clip Recorded, Record video., After you fini, h recording a clip, pre, button.
View all Canon XF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Recording Video and Photos NOTES • The REC button on the handle unit has a lock lever to prevent accidental operation. Set the lock lever to C in cases such as when you do not want a recording inadvertently paused or do not plan to use this REC button. Return the lever to its previous position to enable use of the REC button again. 41 • If the camcorder switches to the other SD card while recording video due to the relay recording function (A 49), the two parts (before/after the switch) will be recorded as separate clips. With the software Data Import Utility, you can join MP4 clips recorded on different SD cards and save them on a computer as a single clip (A 115). • When recording clips on an SDHC card, the video (stream) file in the clip will be split approximately every 4 GB. Playback with the camcorder will be continuous. • The maximum continuous recording time of a single clip is 6 hours. After that, a new clip will be created automatically and recording will continue as a separate clip. • When recording in bright places, it may be difficult to use the LCD screen. In such case, use the viewfinder or adjust the brightness of the screen (A 25). • When you need to record for a long time with the camcorder set on a tripod, you can close the LCD panel and use only the viewfinder in order to save power when using a battery pack (A 24). Reviewing the Latest Clip Recorded You can review the last 4 seconds of the last clip recorded with the camcorder without switching to While reviewing the clip, there will be no sound from the built-in speaker. 1 Record video. 2 After you finish recording a clip, press the u button. mode.