Canon i70 i70 Quick Start Guide - Page 58

Troubleshooting Cannot Print Properly through Infrared Transmission Problem Cannot Print Properly through Infrared Transmission Possible Cause The required driver is not installed Try This • When using other than Windows 95, Windows 98 or later must have been preinstalled and Microsoft Infrared Communication Driver must be installed in the computer. • When Windows 95 is used, Microsoft Infrared Communication Driver Version 2.0 must be installed in the computer. See "Printing Data through Infrared Transmission" on page 11. The infrared communication driver is inactive - Windows 98 Start the infrared monitor and check whether the infrared transmission driver is active. 1. Click Start, Settings, and Control Panel. 2. Double-click Infrared Monitor. 3. Click the Options tab. 4. Check the Enable infrared communication check box. Note When the transmission speed is set to 4 Mbps, operation of the printer may become unstable depending on the type of your computer. In this case, check the Limit connection speed to: check box and click to select [115.2kbps]. The installation place, distance, and/or angle is improper Your computer is not a PC/AT compatible machine or the infrared port used does not conform to IrDA 1.1 Check the installation place, distance, or angle according to the Section " Printing Data through Infrared Transmission." The infrared transmission function of this printer can be used only with the PC/ AT compatible machine or the PDA that has an infrared port conforming to IrDA 1.1. Other computers and PDAs cannot be used for printing through infrared transmission. 56