Canon imagePROGRAF iPF760 User Guide - Page 495
Menu Settings
View all Canon imagePROGRAF iPF760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 495 highlights
iPF760 Menu Settings Menu Settings Menu items are as follows. The printer menu is classified into regular menu items available when no print job is in progress and menu during printing items only available while printing is in progress. see "Printer Menu Operations." →P.482 Regular menu Paper Menu Not displayed Menu during printing Ink Menu The same Ink Menu as normal is displayed. Job Menu The same Job Menu as normal is displayed. Set./Adj. Menu A limited Set./Adj. Menu containing the following items is displayed. • Adj. Fine Feed (*1) • Printer Info *1: Only displayed in the menu during printing. Not displayed in the regular menu. Control Panel For instructions on selecting menu items, see "Menu Operations." →P.483 For details on menu levels and values, see "Menu Structure." →P.486 Paper Menu The Paper Menu is not displayed during printing. Printer Menu Load Paper Setting Item Description, Instructions Select sheets or rolls and load the paper. Eject Paper Choose this item before removing loaded paper. Chg. Paper Type (*1) Change the type of paper loaded. (See "Changing the Type of Paper.") →P.445 Chg. Paper Size Change the size of paper loaded. (See "Specifying the Paper Length.") →P.447 (See "Paper Sizes.") →P.434 ManageRemainRoll Choose On to print a barcode at the end of a roll before you remove it. The printed barcode can be used in managing the amount of roll paper left. Choose Off if you prefer not to print the barcode. (See "Keeping Track of the Amount of Roll Paper Left.") →P.452 Paper Details (The type of paper is displayed here.) (*1) Head Height Skew Check Lv. Adjust the Printhead height. (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.558 If you print on Japanese paper (washi) or other handmade paper that has an irregular width, choose Loose for a higher skew detection threshold, or choose Off to disable skew detection. However, if paper is loaded askew when detection is Off, note that paper jams or Platen soiling may occur. Cutting Mode Specify whether or not to cut with the standard round-bladed cutter. Choose Automatic to have the roll cut automatically after printing. If you choose Manual, the paper will not be cut after printing. Instead, a line will be printed at the cut position. Choose Eject if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry. Cut Speed Choose the cutting speed. If you use adhesive paper, choosing Slow helps prevent adhesive from sticking to the cutter and keeps the cutter sharp. Trim Edge First If a roll is loaded, the end of the paper will be cut. 495 User's Guide