Canon imagePROGRAF iPF760 User Guide - Page 499
Replace P.head, B:Standard/Draft
View all Canon imagePROGRAF iPF760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 499 highlights
iPF760 Adjust Printer Feed Priority Setting Item Adjust Length AdjustmentPrint A:High B:Standard/Draft Change A:High Settings B:Standard/Draft Mainte- Head Cleaning nance Nozzle Check Replace P.head Repl. maint cart Head Info GL2 Replot GL2 BufferClear GL2 Set- Quality tings Manager Color Mode Monochrome Color (CAD) 1 Color (CAD) 2 Color (CAD) 3 Color (CAD) 4 Color (CAD) 5 Print Quality Input Resolution Print (Economy) Paper Paper Source Manager Margin Menu Settings Description, Instructions Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length (Adjust Length).") →P.564 Displayed when you have selected Feed Priority > Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from AdjustmentPrint or the discrepancy that you measured (as a percentage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. Control Panel Clean the Printhead. (See "Cleaning the Printhead.") →P.576 Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Printer Menu Print a test pattern to check the nozzles. When replacing the Printhead, choose Yes and follow the instructions on the screen. (See "Replacing the Printhead.") →P.577 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. When replacing the Maintenance Cartridge, choose Yes and follow the instructions on the screen. (See "Replacing the Maintenance Cartridge.") →P.584 Indicates information about the printhead. Print the previous GL2 print job again. Clear the print data in the replot buffer. Print in monochrome. Print in standard colors. Print in brighter colors. Print emulating the following printers, in colors resembling colors produced by these printers: Canon iPF500, iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810, iPF815, iPF820, and iPF825. (*2) Print emulating the HP Designjet 500/800, in colors resembling colors produced by these printers.(*2) Print emulating the HP Designjet 1000, in colors resembling colors produced by this printer.(*2) Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. Although printing quality is diminished, less ink is consumed than in regular printing. Select On to conserve ink. Choose the source of paper for HP-GL/2 printing. 499 Specify the margin around paper. The margin for the trailing edge of sheets is 23 mm (0.9 in). User's Guide