Canon imagePROGRAF iPF760 User Guide - Page 573

iPF760 When to Replace Ink Tanks • If the Tab Selection screen is not displayed, press the Menu button. Note • If an error has occurred and the Tab Selection screen cannot be displayed, display Ink Info as follows. 1. Press the OK button to display Printer Info. 2. Press the ▲ or ▼ button to select Ink Info. 3. Press the OK button. The remaining ink levels shown on the Display Screen correspond to the inks identified by the Color Label on the bottom of the Display Screen. These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if you have deactivated ink level detection. The remaining ink level is indicated as shown below. Maintenance and Consumables Ink Tanks If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is displayed indicating to check the remaining ink levels, or after tasks that consume a lot of ink such as large-format printing or head cleaning, check the remaining levels and replace Ink Tank as needed. (See "Replacing Ink Tanks.") →P.568 When to Replace Ink Tanks Replace or prepare to replace ink tanks in the following situations. If a message for checking the ink is shown on the Display Screen When there is little ink left, the Message Lamp is lit and "Not much ink is left." is shown on the Display Screen. You can continue to print, but prepare to replace the Ink Tank. (See "Checking Ink Tank Levels.") →P.572 Before print jobs and maintenance that consume a lot of ink If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require a lot of ink. In this case, replace or prepare to replace the Ink Tank before maintenance. 573 User's Guide