Canon imagePROGRAF iPF760 User Guide - Page 625

iPF760 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified HP-GL/2 jobs are printed at maximum size, even if a standard size is specified Cause The page size of the HP-GL/2 print job, as created in the source application, is incorrect. Corrective Action In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to On. The layout will be changed to the optimal layout. (See "Menu Settings.") →P.495 HP-GL/2 printing takes a long time Cause Large print jobs with a lot of data take longer to print. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. Corrective Action Please wait a while until printing is finished. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") →P.495 Replotting with HP-GL/2 jobs is not possible. Cause Corrective Action The data was lost because of replotting. Data for replotting is lost after the following operations. In this case, send the print job again. • The memory buffer was cleared from the Control Panel. • The printer was turned off. • The printer has received a new HP-GL/2 print job. • Printing has been canceled The printer stops when printing a HP-GL/2 job (the carriage stops moving) Cause The printer is analyzing the print job. Corrective Action Please wait a while until printing is finished. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") →P.495 Troubleshooting HP-GL/2 problems 625 User's Guide