Canon imagePROGRAF iPF760 User Guide - Page 642
Paper position not suitable for borderless printing.
View all Canon imagePROGRAF iPF760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 642 highlights
Paper position not suitable for borderless printing. iPF760 Cause The loaded paper is a size not compatible with borderless printing. Corrective Action The printer now starts printing the print job. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See Paper Reference Guide.) Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. Paper position not suitable for borderless printing. Cause Because paper expands or contracts depending on the environment of use, it may become narrower or wider than the supported width for borderless printing. The paper is loaded askew. Corrective Action Press ▲ or ▼ to select Stop Printing, and then press the OK button. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See Paper Reference Guide.) Select None when you have set Detect Mismatch in the Control Panel menu to Warning. However, note that this error may affect the printing quality. Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are between the ink grooves for borderless printing. Insert the roll firmly until it touches the flange of the Roll Holder. (See "Attaching the Roll Holder to Rolls.") →P.439 Select None when you have set Detect Mismatch in the Control Panel menu to Warning. However, note that this error may affect the printing quality. Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. Roll paper is not securely in contact with roll holder. Cause When the roll was loaded, the roll was not inserted firmly all the way on the Roll Holder. Corrective Action Follow these steps to reload the roll. 1. Press the OK button and remove the roll holder from the printer. 2. Insert the roll firmly on the Roll Holder until it touches the flange. (See "Attaching the Roll Holder to Rolls.") →P.439 3. Load the Roll Holder in the printer. Error Message Messages regarding paper 642 User's Guide