Cisco NAC3350-PROF-K9 Hardware Installation Guide - Page 115
Command, Description, rpm -q Collector
View all Cisco NAC3350-PROF-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Chapter 3 Installing the Clean Access Manager and Clean Access Server Useful CLI Commands for the CAM/CAS The Clean Access Server is shipped with a default version of the Cisco NAC Profiler Collector component, which needs to be enabled and configured separately when integrating with the Cisco NAC Profiler solution. Table 3-5 lists CLI commands issued on the CAS for the Cisco NAC Profiler Collector service. For complete details on the Cisco NAC Profiler solution, refer to the Cisco NAC Profiler Installation and Configuration Guide and Release Notes for Cisco NAC Profiler. Note To display the version of the Collector on the CAS, SSH to the CAS machine running the Collector service and type rpm -q Collector. Table 3-5 Cisco NAC Profiler Collector CLI Commands for CAS Command service collector start service collector stop service collector verify service collector status Description Starts the Collector service on the CAS. Shuts down the Collector service on the CAS. Displays the configured Collector Services running on the CAS Collector Network Configuration Collector Name = bcas1-fw Connection Type = server Listen on IP = 10.40.1.10 Network IP ACL 127.0.0.1 10.10.0.211 10.10.0.210 10.10.0.212 Port Number = 31416 Encryption type = AES Shared secret = profiler Displays the running status of the individual Collector modules on the CAS, for example: Profiler Status o Server Not Installed o Forwarder Running o NetMap Running o NetTrap Running o NetWatch Running o NetInquiry Running o NetRelay Running OL-20326-01 Cisco NAC Appliance Hardware Installation Guide 3-45