Cisco NAC3350-PROF-K9 Hardware Installation Guide - Page 79
Step 13, within
View all Cisco NAC3350-PROF-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 3 Installing the Clean Access Manager and Clean Access Server Installing the Clean Access Manager c. If the country contains more than one time zone, the time zones for the country appears. d. Choose the appropriate time zone region from the list, such as 21 for Pacific Time, and press Enter. e. Confirm your choices by entering 1, or use 2 to cancel and start over. The following information has been given: United States Pacific Time Is the above information OK? 1) Yes 2) No #? 1 Step 13 Type and confirm the current date and time, using format hh:mm:ss mm/dd/yy. Current date and time hh:mm:ss mm/dd/yy [11:53:12 08/22/08]: 11:53:12 08/22/08 You entered 11:53:12 08/22/08 Is this correct? (y/n)? [y] y Step 14 Follow the prompts to configure the temporary SSL security certificate that enables secure connections between the CAM and the administrator web console as follows: a. Type the IP address or domain name for which you want the certificate to be issued, or press enter to accept the default IP address (typically the eth0 IP address you already specified, for example 10.201.240.11). Note This is also the IP address or domain name to which the web server responds. If DNS is not already set up for a domain name, the CAM web console will not load. Make sure to create a DNS entry in your servers, or else use an IP address for the CAM. b. For the organization unit name, enter the group within your organization that is responsible for the certificate (for example, DOC). c. For the organization name, type the name of your organization or company for which you would like to receive the certificate (for example, Cisco Systems), and press Enter. d. Type the name of the city or county in which your organization is legally located (for example, San Jose), and press Enter. e. Type the two-character state code in which the organization is located (for example, CA or NY), and press Enter. f. Type the two-letter country code (for example, US), and press Enter. Step 15 Confirm values and press Enter to generate the SSL certificate or type n to restart. You entered the following: Domain: 10.201.240.11 Organization unit: DOC Organization name: Cisco Systems City name: San Jose State code: CA Country code: US Is this correct? (y/n)? [y] y Note You must generate the temporary SSL certificate or you will not be able to access the CAM web console. Step 16 Specify whether or not you want the CAM to feature Pre-login Banner Support at the following prompt. Enable Prelogin Banner Support? (y/n)? [n] For more information and an example of the Pre-login Banner feature, see Figure 3-2 on page 3-14. OL-20326-01 Cisco NAC Appliance Hardware Installation Guide 3-9