Cisco NAC3350-PROF-K9 Hardware Installation Guide - Page 60
Adjusting the Slide-rail Length, Step 6
View all Cisco NAC3350-PROF-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Rack-Mounting Your Cisco NAC Appliance CAM/CAS Figure 2-5 Adjusting the Slide-rail Length Chapter 2 Preparing for Installation 1 Adjustment tab 2 Release tab 3 Pins not extended through the mounting flange and slide rail 4 Pins extended through the mounting flange and slide rail Step 6 Align the pins (see Figure 2-6) on the front rail-locking carrier to the front mounting flange. If you have adjusted the rail length, push the rail-locking carrier back toward the rear of the slide rail to align the slide rail with the mounting flange. Then, press the tab to secure the front of the slide rail to the front mounting flange. Note Ensure that the pins are fully extended through the mounting flange and the slide rail. Step 7 Repeat the steps from 1 to 6 for the other slide rail. 2-18 Cisco NAC Appliance Hardware Installation Guide OL-20326-01