Cisco NAC3350-PROF-K9 Hardware Installation Guide - Page 16
Platform, FIPS Option, NAC-3350 CAM/CAS
View all Cisco NAC3350-PROF-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
About Cisco NAC Appliance Chapter 1 Cisco NAC Appliance Hardware Platforms Cisco NAC Appliance Releases 4.8(x) only support and can only be installed on the following Cisco NAC Appliance platforms: Platform NAC-3315 CAM/CAS 1 NAC-3355 CAM/CAS 1 NAC-3395 CAM 1 FIPS Option Yes Yes Yes Non-FIPS Option Yes Yes Yes NAC-3310 CAM/CAS Yes (with FIPS card Yes field-replaceable unit only) NAC-3350 CAM/CAS Yes (with FIPS card Yes field-replaceable unit only) NAC-3390 CAM NAC-3140 (EOL) 2,3 Yes (with FIPS card Yes field-replaceable unit only) No Yes 1. If the FIPS card in a Cisco NAC-3315/3355/3395 CAM/CAS ceases to work correctly, make sure the FIPS card operation switch is set to "O" (for operational mode), as described in the "FIPS 140-2 Compliance" section of the Release Notes for Cisco NAC Appliance corresponding to your latest Cisco NAC Appliance release version. If the FIPS card is still not operational, you will need to RMA the appliance with Cisco Systems and replace it with a new Cisco NAC-3315/3355/3395. Refer to the "Cisco NAC Appliance RMA and Licensing" section of the Cisco NAC Appliance Service Contract/Licensing Support document for details. 2. Cisco NAC Appliance Release 4.8(1) and later do not support CCA-3140. 3. The Cisco CCA-3140 (CCA-3140-H1) NAC Appliance (EOL) requires CD installation of either the Clean Access Server or Clean Access Manager software. Due to limited hardware resources on the CCA-3140, some combinations of Release 4.8 features may cause undesirable system behavior. If you are experiencing problems with Release 4.8 on the CCA-3140, please contact the Cisco Technical Assistance Center (TAC). Refer to the Release Notes for Cisco NAC Appliance corresponding to your latest Cisco NAC Appliance release version, for additional hardware compatibility information, including issues regarding FIPS 140-2 compliance. Table 1-1 and Table 1-2 summarize the hardware specifications for each Cisco NAC Appliance. See the "Diagrams" column for links to detailed diagrams showing NIC ports, power supply sockets, LEDs and buttons. Cisco NAC Appliance Hardware Installation Guide 1-2 OL-20326-01