Cisco NAC3350-PROF-K9 Hardware Installation Guide - Page 66
Set Up Slide Rails, Fasten Front of Slide Rail to Four-Post Rack, Step 8
View all Cisco NAC3350-PROF-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Rack-Mounting Your Cisco NAC Appliance CAM/CAS Figure 2-12 Set Up Slide Rails Post D Post C Post B Post A Slots Chapter 2 Preparing for Installation 253139 Step 8 Fasten the front of the slide rail and EIA latch to the front of the four-post rack by installing a screw in the bottom hole of the selected rack space for your NAC-3355/3395. Then, install another screw in the middle hole to secure the front of the slide rail to the four-post rack (see Figure 2-13). Note Use the 12-24 screws that came in the rack installation kit if you have installed clip nuts or cage nuts in the four-post rack mounting rails. Figure 2-13 Fasten Front of Slide Rail to Four-Post Rack 253143 Step 9 Use two screws to fasten the rear of the slide rail to the respective rear mounting rail of the four-post rack in the upper and bottom holes of the selected rack space for your NAC-3355/3395 (see Figure 2-14). 2-24 Cisco NAC Appliance Hardware Installation Guide OL-20326-01