Cisco SGE2000 Reference Guide - Page 116
Defining Interface Settings, Bridging, VLAN Management, Interface Setting, Of Unit, Interface
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Chapter 6 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide Defining Interface Settings The VLAN Interface Setting Page provides parameters for managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Settings page. All untagged packets arriving to the device are tagged by the ports PVID. 1. Click Bridging > VLAN Management > Interface Setting. The VLAN Interface Setting Page opens: Interface Setting Page The VLAN Interface Setting Page contains the following fields: • Port - Indicates that ports are indicated in the page. • LAG - Indicates that LAGs are indicated in the page. • Of Unit - Displays the stacking member for which the VLAN parameters are displayed. • Interface - The port number included in the VLAN. • Interface VLAN Mode - Indicates the port mode. Possible values are: - General - The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). - Access - The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port (packet type) cannot be designated. It is also not possible to enable/disable ingress filtering on an access port. 108 Chapter 6: Configuring VLANs Defining Interface Settings