Cisco SGE2000 Reference Guide - Page 78
Port Authentication Settings Admin Port Control
![]() |
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide Port Authentication Settings Page The Port Authentication Settings Page contains the following fields: • Port - Indicates the port name. • User Name - Displays the user name. • Current Port Control - Displays the current port authorization state. • Admin Port Control - Displays the admin port authorization state. • Enable Guest VLAN - Specifies whether the Guest VLAN is enabled on the device. The possible field values are: - Enable - Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field. - Disable - Disables port-based authentication on the device. This is the default. • Enable Periodic Reauthentication - Permits immediate port reauthentication. • Reauthentication Period - Specifies the number of seconds in which the selected port is reauthenticated (Range: 300-4294967295). The field default is 3600 seconds. • Reauthenticate Now - Specifies that authentication is applied on the device when the Apply button is pressed. • Authenticator State - Specifies the port authorization state. The possible field values are as follows: - Force-Authorized - The controlled port state is set to Force-Authorized (forward traffic). - Force-Unauthorized - The controlled port state is set to Force-Unauthorized (discard traffic). 70 Chapter 4: Configuring Device Security Defining 802.1x
![](/manual_guide/products/cisco-sge2000-reference-guide-209132b/78.png)