Cisco SGE2000 Reference Guide - Page 96
IP Address, Prefix Length, Apply, Configuring Device Security, Defining DOS Prevention - 24
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide - 192.0.2.0/24, 224.0.0.0/4 - 240.0.0.0/4 (except 255.255.255.255/32) • IP Address - Enter the IP addresses for which DOS attack is enabled. • Mask - Enter the Mask for which DOS attack is enabled. • Prefix Length - Defines the IP route prefix for the destination IP. 3. Define the relevant fields. 4. Click Apply. The martian addresses are added, and the device is updated. 88 Chapter 4: Configuring Device Security Defining DOS Prevention
88
Chapter 4: Configuring Device Security
Defining DOS Prevention
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
–
192.0.2.0/24, 224.0.0.0/4
–
240.0.0.0/4 (except 255.255.255.255/32)
•
IP Address
— Enter the IP addresses for which DOS attack is enabled.
•
Mask
— Enter the Mask for which DOS attack is enabled.
•
Prefix Length
— Defines the IP route prefix for the destination IP.
3.
Define the relevant fields.
4.
Click
Apply
. The martian addresses are added, and the device is updated.