Cisco SGE2000 Reference Guide - Page 64
Source IP Address, Prefix Length, Action, Remove, Access Profile Name, Add Profile Rule
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide - Secure Telnet (SSH) - Assigns SSH access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - HTTP - Assigns HTTP access to the rule. If selected, users accessing the device using HTTP meeting access profile criteria are permitted or denied access to the device. - Secure HTTP (HTTPS) - Assigns HTTPS access to the rule. If selected, users accessing the device using HTTPS meeting access profile criteria are permitted or denied access to the device. - SNMP - Assigns SNMP access to the rule. If selected, users accessing the device using SNMP meeting access profile criteria are permitted or denied access to the device. • Source IP Address - Defines the interface source IP address to which the rule applies. • Prefix Length - Defines the number of bits that comprise the source IP address prefix, or the network mask of the source IP address. • Action - Defines the action attached to the rule. The possible field values are: - Permit - Permits access to the device. - Deny - Denies access to the device. This is the default. • Remove - Removes rules from the selected access profiles. The possible field values are: - Checked - Removes the selected rule from the access profile. - Unchecked - Maintains the rules attached to the access profile. 2. Click the Add button. The Add Profile Rule Page opens: Add Profile Rule Page The Add Profile Rule Page contains the following fields: • Access Profile Name - Defines the access profile name. The access profile name can contain up to 32 characters. 56 Chapter 4: Configuring Device Security Defining Access Method