Cisco SGE2000 Reference Guide - Page 214
Of Unit, Ingress Rate Limit Status, Rate Limit, Committed Information Rate CIR
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
12 Chapter SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide Bandwidth Page The Bandwidth Page contains the following fields: • Port - Indicates the port for which the bandwidth settings are displayed. • LAG - Indicates the LAG for which the bandwidth settings are displayed. • Of Unit - Displays the stacking member for which the bandwidth settings are displayed. • Ingress Rate Limit Status - Indicates if rate limiting is defined on the interface. The possible field values are: - Enable - Enables ingress rate limiting on the interface. - Disable - Disables ingress rate limiting on the interface. • Rate Limit - Defines the amount of bandwidth assigned to the interface. The possible field values are 62-1000000 Kbps. • Committed Information Rate (CIR) - Defines CIR as the queue shaping type. The possible field value is 64-1,000,000 Kbs. • Committed Burst Size (CbS) - Defines CBS as the queue shaping type. The possible field value is 4096-16,769,020 bits. Note This field is not supported on FE ports. Modifying Bandwidth Settings 1. Click Quality of Service > General > Bandwidth. The Bandwidth Page opens: 206 Chapter 12: Configuring Quality of Service Defining General Settings