Cisco SGE2000 Reference Guide - Page 198
Configuring Station Management, System, Security, Trap Management > Station Management
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
11 Chapter SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide - Enable - Enables the device to send authentication failure notifications. - Disable - Disables the device from sending authentication failure notifications. Configuring Station Management 1. Click System > SNMP > Security > Trap Management > Station Management. The Station Management Page opens: Station Management Page The Station Management Page contains two areas, the SNMPv1,2 Notification Recipient and the SNMPv3 Notification Recipient table. The SNMPv1,2 Notification Recipient table area contains the following fields: • Recipients IP - Indicates the IP address to whom the traps are sent. • Notification Type - Defines the notification sent. The possible field values are: - Trap - Indicates traps are sent. - Inform - Indicates informs are sent. • Community String - Identifies the community string of the trap manager. • Notification Version - Determines the trap type. The possible field values are: - SNMP V1 - Indicates SNMP Version 1 traps are sent. 190 Chapter 11: Configuring SNMP Defining Trap Management