Cisco SGE2000 Reference Guide - Page 120
Interface, GVRP State, Dynamic VLAN Creation, GVRP Registration, Bridging, VLAN Management
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 6 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide • Interface - Displays the interface on which GVRP is enabled. • GVRP State - Indicates if GVRP is enabled on the interface. The possible field values are: - Enabled - Enables GVRP on the selected interface. - Disabled - Disables GVRP on the selected interface. • Dynamic VLAN Creation - Indicates if Dynamic VLAN creation is enabled on the interface. The possible field values are: - Enable - Enables Dynamic VLAN creation on the interface. - Disable - Disables Dynamic VLAN creation on the interface. • GVRP Registration - Indicates if VLAN registration through GVRP is enabled on the device. The possible field values are: - Enable - Enables GVRP registration on the device. - Disable - Disables GVRP registration on the device. 2. Define the relevant fields. 3. Click Apply. The GVRP Settings are defined, and the device is updated. Modifying GVRP Settings 1. Click Bridging > VLAN Management > GVRP Settings. The GVRP Settings Page opens: 2. Click the Edit button. The Edit GVRP Page opens: Edit GVRP Page The Edit GVRP Page contains the following fields: • Interface - Displays the interface on which GVRP is enabled. The possible field values are: - Port - Indicates the port number on which GVRP is enabled. - LAG - Indicates the LAG number on which GVRP is enabled. • GVRP State - Indicates if GVRP is enabled on the interface. The possible field values are: 112 Chapter 6: Configuring VLANs Configuring GVRP Settings