Cisco SGE2000 Reference Guide - Page 158
Enable IGMP Snooping Status, VLAN ID, Host Timeout, MRouter Timeout, Leave Timeout
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 9 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide IGMP Snooping Page The IGMP Snooping Page contains the following fields: • Enable IGMP Snooping Status - Indicates if IGMP Snooping is enabled on the device. IGMP Snooping can be enabled only if Bridge Multicast Filtering is enabled. The possible field values are: - Enable - Enables IGMP Snooping on the device. - Disable - Disables IGMP Snooping on the device. • VLAN ID - Specifies the VLAN ID. • IGMP Snooping Status - Indicates if IGMP snooping is enabled on the VLAN. The possible field values are: - Enable - Enables IGMP Snooping on the VLAN. - Disable - Disables IGMP Snooping on the VLAN. • Host Timeout - Indicates the amount of the time the Host waits to receive a message before it times out. The default value is 260 seconds. • MRouter Timeout - Indicates the amount of the time the Multicast router waits to receive a message before it times out. The default value is 300 seconds. • Leave Timeout - Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout 150 Chapter 9: Configuring Multicast Forwarding IGMP Snooping