Cisco SGE2000 Reference Guide - Page 119
Configuring GVRP Settings, Bridging, VLAN Management, GVRP Settings, GVRP Global Status
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide 6 Configuring GVRP Settings GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To define GARP. The Global System LAG information displays the same field information as the ports, but represent the LAG GVRP information. 1. Click Bridging > VLAN Management > GVRP Settings. The GVRP Settings Page opens: GVRP Settings Page The GVRP Settings Page contains the following fields: • GVRP Global Status - Indicates if GVRP is enabled on the device. The possible field values are: - Enable - Enables GVRP on the selected device. - Disable - Disables GVRP on the selected device. • Copy from Entry Number - Indicates the row number from which GVRP parameters are copied. • To Entry Number - Indicates the row number to which GVRP parameters are copied • Port - Indicates the port number on which GVRP is enabled. • LAGs - Indicates the LAG number on which GVRP is enabled. • Of Unit - Displays the stacking member for which the GVRP parameters are displayed. Chapter 6: Configuring VLANs 111 Configuring GVRP Settings