Compaq 100B Maintenance and Service Guide - Page 19
Computer Setup, Advanced for advanced users continued, Table 2-6
![]() |
View all Compaq 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 2-6 Computer Setup-Advanced (for advanced users) (continued) Bus Options On some models, allows you to enable or disable: ● PCI SERR# Generation. Default is enabled. ● PCI VGA Palette Snooping, which sets the VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed. Default is disabled. Device Options Allows you to set: ● Num Lock State at Power-On (off/on). Default is off. ● Integrated Video (enable/disable). Use this option to disable the integrated video controller when another video controller is present in the system. Default is enabled. ● NIC Option ROM Download (PXE, iSCSI, disabled). The BIOS contains an embedded NIC option ROM to allow the unit to boot through the network to a PXE server. This is typically used to download a corporate image to a hard drive. The NIC option ROM takes up memory space below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is limited. This F10 option will allow users to disable the downloading of this embedded NIC option ROM thus giving more DCH space for additional PCI cards which may need option ROM space. The default will be to have the NIC option-ROM-enabled. Default is PXE. 11
![](/manual_guide/products/compaq-100b-maintenance-service-guide-e9e11af/19.png)