Craftsman 10872 Operation Manual - Page 18
Blade, System, Figs., Caution, Causes It And, To Help Prevent
View all Craftsman 10872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
BLADE GUARD SYSTEM (Figs. 4 and 4a) Fig. 4 The iower blade guard is an integral part of the saw's base and ONLY encloses the blade when it is ABOVE the saw's base (see Fig_4)_ When the desired depth-of-cut is set, the blade is manually lowered berow the base, (in a plunge action) by releasing the blade guard release lever wh]ie holding the finger lift bracket on the base, as you lower the saw's handle and blade to the selected depth, Upper Blade Guard When starling and while making a cut, the blade is always exposed in front of and then underneath the workpiece When the blade clears the cut through workpiece, the lower blade guard and base will automatically "drop" down and the blade guard release lever will engage the upper blade guard, locking the blade ABOVE the base and enclosing the blade in the upper and lower blade guard system, Fig. 4a Manually lower the blade, and remove hand from fing t and blade guard release lever before starlin; the cu! Z_ CAUTION: 1"his Blade Guard system is designed for your protection and safety and should NEVER be altered for any reason, If It becomes damaged or begins to operate slowly or sluggishly, DO NOT operate the saw until the damage or problem has been corrected, repaired or replaced° KICKBACK..°WHAT CAUSES IT AND WAYS TO HELP PREVENT IT (Figs. 5, 5a and 5b) The Causes of Kickback Fig, 5 _f_ "_t"-=" Direction ! T | 1 Cor_ec!b_ededeplh BladeissetIoodeep 18