Craftsman 10872 Operation Manual - Page 34
Laser Beam Or Ledi
View all Craftsman 10872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Tool powerswitch (Paddle) will not activate the tool. Motor or motor brush failure_ c0rrectlveAction :. : After verifying power to the tool and verifying that the power switch (paddle) activates properly,try the following: Tap the plasttc body of the tool with a plastic mallet or the plastic handle of a screwdriver and try again. If the tool stilldoes not operate, return for service,, Laser or LED will not Illuminate, No power to tool DO NOT STARE INTOTHE LASER BEAM OR LEDI PERMANENTEYE DAMAGE COULD RESULTIVedfy proper power connection as describedabove. LasedLED switch Jammed, Removeany debrisaround Laser,q.ED switch. Lower blade guard will not return to locked posltlon_ Woodchfps or debds blocking guard. Unplug tooll Remove any debris that may be blocking the guard. Blowout with an alr hose if avallaNe (wear eye protection before using air hose°) Lowerguard return spring brokenor dislodged. DO NOT USETOOL! Return for repair. Guardlock broken. DO NOT USETOOLI Return for repair. Guard lock spring broken. DO NOT USETOOLI Return for repair. Blade bolt is tight but the blade sttll sp_nsfreely Blade washertsnot aligned properlywith arbor shaft Loosen blade bolt. Spin blade washerslightly untilR aligns with arbor shaft featuresand will no longer spin.Retightenblade bolt. 34