Craftsman 10872 Operation Manual - Page 33
Inserted Into the AC outlet
View all Craftsman 10872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Tool wlll not power on AC power cord is not fully Inserted Into the AC outlet or has fallen out No power on AC outlet Properly Install power cord plug Into the AC outlet Find circuit breaker panel and verify that the breaker controlling your outlet Is ON, if the breaker continues to switch to the off position, contact a qualified electrician to locate the cause, No power on AC outlet. Your outlet may be a GFI type or it may be downstream from another GFI outlet, Locate GFI outlets and verify that the "RESET_t'ab is pushed In. If the GFI RESET tab pops out again, contact a qualified electrician to locate the cause. PowerCord Damaged Tool power switch (Paddle) will not activate the tool, Safety Interlock Is not activated properly. Safety Interlock may be Jammed° Remove powerplug from the AC outlet and Inspect the plug and the length of the cord. Do not a_empt repair of the power cord, Return for serviceor discard° Read Operator's Manual. Excesslve paddle pressure may jam the paddle release. Slide the paddle lock toward the rear of the tool fully,and then squeeze the paddle, Unplug the tooll Turnthe tool overand Inspect the safetyInterlock and paddle. Removeany woodchipsor debris that may have accumulated. 33