D-Link DGS-1510-20 User Manual - Page 130

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Report Suppression Suppression Time Proxy Reporting Source Address Mrouter Port Learning Querier State Query Version Query Interval Max Response Time Robustness Value Last Listener Query Interval Select this option to enable or disable the report suppression. Enter the interval of suppressing duplicate MLD reports or leaves. The range is from 1 to 300. Select this option to enable or disable the proxy-reporting function. Enter the source IP of proxy reporting. This is available when Enabled is selected in Proxy Reporting. Select this option to enable or disable Mrouter port learning. Select this option to enable or disable the querier state. Select the general query packet version sent by the MLD snooping querier. Options to choose from are 1, and 2. Enter the interval at which the MLD snooping querier sends MLD general query messages periodically. Enter the maximum response time, in seconds, advertised in MLD snooping queries. The range is 1 to 25. Enter the robustness variable used in MLD snooping. Enter the interval at which the MLD snooping querier sends MLD group-specific or group-source-specific (channel) query messages. Click the Apply button to accept the changes made. MLD Snooping Groups Settings This window is used to configure and view the MLD snooping static group, and view MLD snooping group. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Groups Settings, as shown below: Figure 5-46 MLD Snooping Group Settings window The fields that can be configured for MLD Snooping Static Groups Settings are described below: Parameter VID Description Enter a VLAN ID of the multicast group. 122