D-Link DGS-1510-20 User Manual - Page 179

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 8-4 ACL Configuration Wizard (Add Rule for MAC ACL) window The fields that can be configured are described below: Parameter Sequence No. Source Destination Specify Ethernet Type Ethernet Type Description Enter the ACL rule number here. This value must be between 1 and 65535. Select Auto Assign to automatically generate an ACL rule number for this entry. Select and enter the source information here. Options to choose from are Any, Host, and MAC. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's MAC address here. When the MAC option is selected, the Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided. Select and enter the destination information here. Options to choose from are Any, Host, and MAC. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's MAC address here. When the MAC option is selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Select the Ethernet type option here. Options to choose from are aarp, appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mopconsole, mop-dump, vines-echo, vines-ip, xns-idp, and arp. Enter the Ethernet type hexadecimal value here. This value must be between 0x600 and 0xFFFF. When any Ethernet type profile is selected in the Specify Ethernet Type drop-down list, the appropriate 171