D-Link DGS-1510-20 User Manual - Page 315
ARP Inspection Log, IP Source Guard, IP Source Guard Port Settings
View all D-Link DGS-1510-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ARP Inspection Log This window is used to view, configure and clear the ARP inspection log information. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection Log, as shown below: Figure 9-47 ARP Inspection Log window The fields that can be configured are described below: Parameter Log Buffer Description Enter the log's buffer value used here. This value must be between 1 and 1024. By default, this value is 32. Click the Apply button to accept the changes made. Click the Clear Log button to clear the log. IP Source Guard IP Source Guard Port Settings This window is used to view and configure the IP source guard port settings. To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Port Settings, as shown below: Figure 9-48 IP Source Guard Port Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port State Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the IP source guard's state for the specified 307