D-Link DGS-1510-20 User Manual - Page 31
System Log Discriminator Settings, System > System Log > System Log Discriminator Settings
View all D-Link DGS-1510-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 3-15 System Log Settings window The fields that can be configured for Global State are described below: Parameter Source Interface State Type VID Description Select this option to enable or disable the source interface's global state. Select the type of interface that will be used. Option to choose from is VLAN. Enter the VLAN ID used here. The value is between 1 and 4094. Click the Apply button to accept the changes made. The fields that can be configured for Buffer Log Settings are described below: Parameter Buffer Log State Severity Discriminator Name Write Delay Description Select whether the enable or disable the buffer log's global state here. Options to choose from are Enable, Disabled, and Default. When selecting the Default option, the buffer log's global state will follow the default behavior. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. Enter the interval for periodic writing of the logging buffer to FLASH. This value must be between 0 and 65535 seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable the write delay feature. Click the Apply button to accept the changes made. The fields that can be configured for Console Log Settings are described below: Parameter Console Log State Severity Discriminator Name Description Select whether the enable or disable the console log's global state here. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. Click the Apply button to accept the changes made. System Log Discriminator Settings This window is used to view and configure the system log's discriminator settings. To view the following window, click System > System Log > System Log Discriminator Settings, as shown below: 23