D-Link DGS-1510-20 User Manual - Page 161

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 7-5 Port Rate Limiting window The fields that can be configured are described below: Parameter Unit From Port / To Port Direction Rate Limit Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the direction option here. Options to choose from are Input and Output. When Input is selected, the rate limit for ingress packets is configured. When Output is selected, the rate limit for egress packets is configured. Select and enter the rate limit value here. When Bandwidth is selected, enter the input/output bandwidth value used in the space provided. This value must be between 64 and 10000000 kbps. Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. When Percent is selected, enter the input/output bandwidth percentage value used in the space provided. This value must be between 1 and 100 percent (%). Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. Select the None option to remove the rate limit on the specified port(s). The specified limitation cannot exceed the maximum speed of the specified interface. For the ingress bandwidth limitation, the ingress can trigger a pause frame or a flow control frame when the received traffic exceeds the limitation. Click the Apply button to accept the changes made. Queue Rate Limiting This window is used to view and configure the queue rate limiting settings. 153