D-Link DGS-1510-20 User Manual - Page 243

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Specify ICMP Message Type ICMP Message Type Message Code DSCP Flow Label Time Range destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select the ICMP message type used here. When the ICMP Message Type is not selected in the Specify ICMP Message Type drop-down list, enter the ICMP Message Type numerical value used here. When the ICMP Message Type is selected in the Specify ICMP Message Type drop-down list, this numerical value will automatically be entered. When the ICMP Message Type is not selected in the Specify ICMP Message Type drop-down list, enter the Message Code numerical value used here. When the ICMP Message Type is selected in the Specify ICMP Message Type drop-down list, this numerical value will automatically be entered. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range to associate with this ACL rule. After selecting the Protocol ID option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-70 Extended IPv6 ACL (Add Rule) Protocol ID window The dynamic fields that can be configured are described below: Parameter Protocol Fragments Source Description Enter the Protocol ID value used here. This value must be between 0 and 255. Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from 235