D-Link DGS-1510-20 User Manual - Page 197

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide between 0 and 63. Time Range Enter the name of the time range to associate with this ACL rule. Action Select the action that this rule will take here. Options to choose from are Permit and Deny. After selecting the Protocol ID option as the Protocol Type, the following section will appear. Figure 8-18 ACL Configuration Wizard (Add Rule for IPv4 ACL) Protocol ID window The dynamic fields that can be configured are described below: Parameter Protocol Fragments Source Destination Description Enter the Protocol ID value in the space provided. This value must be between 0 and 255. Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from are Any, Host, and IP. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's IP address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Select and enter the destination information here. Options to choose from are Any, Host, and IP. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's IP address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of destination IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. 189